SANUS VLT7 Technical Specifications
- 6″ of extension &12 degrees of tilt
- Supported VESA Patterns: 200 x 200 through 600 x 400
- Profile: 2.1″
- Post-install Leveling: +/- 1 degree
- Compatible Stud Width: 16″ and 24″
- Compatible wall: Wood studs, solid concrete/ concrete blocks, steel studs ( requires steel stud install kit, not included)
- What’s in the box: Left and right TV brackets, wall plate, wall plate drilling template, Tv Screws (4x – M6 x 12mm, M6 x 20mm, M6 x 35mm, M8 x 16mm, M8 x 20mm, M8 x 30mm, M8 x 40mm, M8 x 50mm), M6/M8 washers, 2.5mm, 5mm, and 22mm spacers, 5/16 inch x 2 3/4 inch lag bolts (4x), Fischer UX10 x 60R concrete anchors (4x), 3/16 inch hex key.
- Tools Required for Installation: Tape measure, pencil, level, Phillips screwdriver, electric drill, socket wrench with 1/2 inch (13mm) socket, stud finder (wood and steel studs), awl (wood and steel stud), 7/32 inch (5.5mm) wood drill bit (wood stud), 3/8 inch (10mm) concrete drill bit (concrete), hammer (concrete), 1/2 inch (13mm) steel drill bit (steel studs) .